Product Description; Type Plate - Mennekes AMTRON Manuel D'utilisation Et Guide D'installation

3 Product description

Equipment features
„ Charging powers up to 7.4 kW (single-phase) / 22 kW
(three-phase).
„ Communication between device and vehicle according
to ISO 15118. *
„ Authorisation via Backend-System or RFID card
(ISO 14443A / MIFARE classic and MIFARE DESFire).
„ Integrated modem for mobile network standards 4G
(LTE), 3G (UMTS) and 2G (GSM).
„ Compatible with OCPP 1.5 and OCPP 1.6.
„ MENNEKES ECU, Electronic Control Unit.
„ Status information via LED information panel.
„ Integrated MiD energy meter.
„ Circuit breaker. *
„ Type A residual current device. *
„ DC residual current monitoring > 6 mA.
„ Integrated shunt release (for welding detection). *
„ Relay for connection of an external shunt release (for
welding detection). *
„ Unlocking function in the event of a power failure (only
for devices with Type 2 charging socket).
„ Phase sequence relay. *
„ Temperature monitoring.
„ Integrated cable storage.
„ Wired ready for connection.
*optional
Optional equipment
Communication according to
ISO 15118
Circuit breaker
Type A residual current device
Shunt release
Relay for shunt release
Phase sequence relay
6
3.1
The type plate contains all important device data. The
type plate shown is an example.
f Note the type plate on your device. The type plate is
Fig. 1: Type plate (pattern)
1. Manufacturer
2. Type
3. Item / serial number
4. Rated current
5. Rated voltage
6. Rated frequency
7. Standard
8. Barcode
9. Number of phases
10. Degree of protection
11. Information
- - x
- x x
- x x
- x x
x - -
- x x

Type plate

located at the top on the underpart of the enclosure.
1
XXXXXXXXX
2
Typ.SN:
3
I : xx A
4
nA
U : xxx V ~
5
n
f : xx Hz
6
n
IEC 61851, DIN IEC/TS 61439-7
7
8
xxxxxxxx.xxxxx
xP+N+
9
IPxx
10
AEVCS
11