10.4 Operation with user key with deadbolt lock function
Prerequisites:
A user key with the deadbolt lock function also has the "latchbolt lock operation"
locking authorisation (self-locking action)
page 48
1. Hold the user key in front of the antenna for at
least 2 seconds.
Acoustic signal is heard. LED illuminates
white.
Acoustic signal is heard again. LED briefly
illuminates white again.
3. Hold the user key in front of the antenna for at
least 2 seconds to close.
Acoustic signal is heard. LED illuminates
white.
Acoustic signal is heard again. LED
switches to red.
User key with deadbolt lock function (permanent open)
10.3 Operation with a normal user key,
1 s
1 s
DT 710c
2. Remove user key.
LED switches off.
All locks are permanently open
("permanent open").
1 s
DT 710c
4. Remove user key.
LED switches off. The terminal is now
locked.
DT 710c
DT 710c
49