Measurement Display; Note On Guest Mode - boso medicus control Mode D'emploi

Measurement display

After the end of the measurement, the in-
built valve opens automatically and the
cuff deflates rapidly.
The measured blood pressure values
(systole, diastole, pulse) are displayed (see
illustration 7).
Illustration 7
The measurement is stored automatically
(except for guest mode, see below). If the
memory store is full (30 measurements),
the oldest measurement is deleted and
the current one stored.

Note on guest mode:

If a measurement value is not be kept,
Systole
press „M" while the measured values are
mmHg
still on display.
Invalid measurements with an "Err" mess-
Diastole
age (see page 61) are not stored.
mmHg
If the symbol
urement, it is recommended that the
Pulse/min.
measurement is repeated, holding the
arm completely still. If the
appears after the meas-
symbol
55