Télécharger Imprimer la page

Safety Features; Cleaning And Maintenance - EUROM EK2K Manuel D'utilisation

Masquer les pouces Voir aussi pour EK2K:

Publicité

Les langues disponibles

Les langues disponibles

Once the desired temperature is reached, turn the thermostat dial back slowly
until you hear a click. The temperature is now set. The heater will automatically
switch on and off to maintain the set temperature. To set a higher or lower
temperature, turn the thermostat dial either clockwise or anticlockwise.
To switch the heater off, set the control switch to '0' (off). Unplug.

Safety features

In case of internal overheating, the overheating safeguard will switch the heater off.
This may occur if the heater cannot give off enough heat or if it cannot draw in
enough fresh air. As mentioned above, this is generally caused by (partially) covering
the heater, obstructing the air intake and/or outlet grills or installing the heater too
close to a wall or something similar. When the overheating safeguard switches the
heater off, set the mode selector dial to '0' (off), unplug and allow the heater to cool
down. Remove and/or amend the cause of overheating and reuse the heater as
normal. If you cannot find a cause and overheating recurs, stop using the heater, and
take it in for inspection/repair.

Cleaning and Maintenance

Keep the heater clean. Deposits of dust and dirt in the appliance are a common
cause of overheating so these should be removed regularly. Switch off the heater,
remove the plug from the socket and allow the heater to cool down before cleaning or
carrying out maintenance work.
Wipe the outside of the heater regularly with a dry or slightly damp cloth. Do not
use aggressive soaps, sprays, cleaners or abrasives, waxes, polishes or
chemical solutions!
Using a vacuum cleaner, carefully remove any dust and dirt from the grills and
ensure that the air intake and outlet openings are clean. Be careful not to touch
or damage any internal parts during cleaning!
The heater contains no other parts which need maintenance.
At the end of the season, store the cleaned heater in the original packaging if
possible. Store upright in a cool, dry and dust-free place.
Do not dispose of heater with household waste when if becomes
worn or damaged beyond repair. Take it to your local authority's
collection point for electrical appliances where any reusable
materials will be collected and redistributed.
14

Publicité

loading

Ce manuel est également adapté pour:

Ek3k