Functions And Features Of The Robot Vacuum Cleaner; Included Accessories; Preparing For Use - Miele SLQL0 Mode D'emploi

Functions and features of the
robot vacuum cleaner
The robot vacuum cleaner is suitable for
the daily cleaning of short pile carpets
and fitted carpets, as well as hard floor-
ing.
Please observe the flooring manu-
facturer's cleaning and care instruc-
tions.
The robot vacuum cleaner is fitted with
cameras and sensors. It continually
saves room plans as well as information
regarding areas it can access freely.
The robot vacuum cleaner uses this
data to create an efficient vacuuming
plan of the surfaces to be vacuumed,
which it can then vacuum au-
tonomously.

Included accessories

– Remote control / two batteries
– Two side brushes
– Power supply unit with plug
– Power adapter
– Base station
– Magnetic strip

Preparing for use

Diagrams 1 - 10 for this section are at
the end of these operating instruc-
tions.
Insert the side brushes (Fig. 01)
 Place the robot vacuum cleaner up-
side down on a level, clean surface.
 Press the two side brushes carefully
onto their pins until they audibly en-
gage. Take care to comply with the
markings L and R.
Removing the protective foil (Fig. 02)
 Remove the protective foil from the
base station and from the top of the
robot vacuum cleaner.
Placing the batteries in the remote
control (Fig. 03)
 Remove the battery compartment
cover.
 Insert the two batteries supplied.
Make sure the polarity is correct.
 Close the battery compartment cover.
Switching on the robot vacuum
cleaner (Fig. 04)
 Slide the I/0 switch on the side of the
robot vacuum cleaner to the I posi-
tion.
The rechargeable battery status indica-
tor lights up in the display.
After approx. 60 seconds, the robot
vacuum cleaner will switch into
standby. The battery status indicator
will continue to light up.
The robot vacuum cleaner is reactivated
by pressing any button on the remote
control or one of the sensor fields in the
display.
en-US
13