Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Functions and features of the
robot vacuum cleaner
The robot vacuum cleaner is suitable
for the daily cleaning of short pile
carpets, fitted carpets and hard
flooring.
Please observe the flooring
manufacturer's cleaning and care
instructions.
The robot vacuum cleaner is fitted with a
camera and various sensors. During,
operation, the room plan as well as the
items in the room are stored into memory.
The robot vacuum cleaner then creates
an efficient vacuuming plan to vacuum
the area.
Accessories supplied
– Two side brushes
– Two replacement exhaust filters
– Remote control / two batteries
– Base station, including a cleaning
brush
– Power supply unit with connector
– Power cord with plug
– Magnetic strip
Preparing for use
Diagrams 1 - 13 for the "Preparing for
use" section are at the end of these
operating instructions.
Insert the side brushes (dia. 1)
^ Place the robot vacuum cleaner
upside down on a level, clean
surface.
Do not lift the robot vacuum cleaner
by the area around the dust box as
it can come loose.
^ Press the two side brushes supplied
firmly but carefully onto the pins
provided. Ensure that they match up
correctly with the L and R markings.
Remove the protective foil (dia. 2)
^ Remove the protective foil from the
base station and from the top of the
robot vacuum cleaner.
Place the batteries in the remote
control (dia. 3)
^ Remove the battery compartment
cover.
^ Insert the two batteries supplied,
making sure the polarity is correct.
Switch on the robot vacuum cleaner
(dia. 4)
^ Press the ON switch on the side of
the robot vacuum cleaner.
The rechargeable battery status and
the Auto standard vacuuming mode
indicators will light up in the display.
en
11
Publicité
Table des Matières
