Remove the threads and hair using
the wiper which is located on the bot-
tom of the cleaning tool.
Hold the wiper over a garbage can.
Press the button at the top of the
wiper several times until all threads
and hair have fallen out.
Refit the roller brush. Make sure that
the side with the pointed end is in-
serted into the corresponding slot.
Carefully refit the roller brush cover
making sure it clicks into position.
Refit both identical side brushes, see
previous description "Cleaning the
side brushes".
In order to continue to achieve the
best possible cleaning results, re-
place the roller brush with a new one
after approx. one year.
Cleaning the dust box seals
Clean the seals on the bottom of the
dust box as required.
Place the robot vacuum cleaner up-
side down on a level, clean surface.
Wipe the seals with a damp cloth to
clean them.
In order to continue to achieve the
best possible cleaning results, re-
place the seal unit with a new one af-
ter approx. one year.
Replacing the dust box seal unit
Remove the dust box.
Unlatch the seal unit from the under-
side of the dust box so that the arrow
points to the symbol.
Remove the seal unit.
Insert the new seal unit so that the ar-
row points to the symbol.
Lock the seal unit, making sure it
clicks into position.
en-US
25