Use - Miele SLQL0 Mode D'emploi

 Press the + or - direction button to
set the current minutes.
 Press the OK button to confirm your
selection.
If you want to alter the time of day, pro-
ceed as described above.
Defining the area to be vacuumed
(Fig. 10)

The robot vacuum cleaner is 3
3/8" high. Any items that will be vac-
uumed under should have a mini-
mum clearance of 3 7/16".
You can define any areas which the ro-
bot vacuum cleaner should not have
access to.
 Place the magnetic strip supplied
with the groove facing downwards on
the floor.
The robot vacuum cleaner will not cross
over the magnetic strip.
Adhesive strips are supplied for perma-
nent fixing. Additional magnetic strips
are available to order from the Miele
webstore.

Use


Always observe the robot vac-
uum cleaner during the first cleaning
session in a new environment and af-
ter making changes in your home.
This way you will be able to detect
and remove any problematic obsta-
cles or section off the relevant areas
with the magnetic strip. You must
also check whether steps and drops
in height are recognized properly.
Your robot vacuum cleaner is equipped
with an integrated Wi-Fi module. You
can view status information or execute
control commands using a mobile de-
vice (tablet PC or smartphone).
If you would like to control the robot
vacuum cleaner using a mobile device,
please read the section "Scout RX2
App".
The operation of the robot vacuum
cleaner via remote control and the dis-
play will be described later in this "Use"
section.
Switching on and off
 Press the Power button on the re-
mote control or any sensor field on
the display.
Starting vacuuming
There are two ways to start vacuuming.
Option 1 (remote control)
 Press the  button.
Option 2 (display)
 Press the  sensor field.
The area to be vacuumed will be
cleaned.
en-US
15