Miele SLQL0 Mode D'emploi page 33

Problem
F 7
F 8
Resetting the fault
message after fixing
the problem
Possible cause and solution
Internal system fault
 Switch the robot vacuum cleaner off and on again
(I/0 switch).
"Front wheel dirty" fault
 Check whether the front wheel, the cover, or the
slot depression have become dirty. Remove any
threads and hair, and clean the front wheel, the
cover, and the depression.
You can reset the fault messages described above
in the following ways
– Switch the robot vacuum cleaner off and on again
(I/0 switch).
– Press the Power button on the remote control.
– Press the  sensor field in the display for at least
three seconds.
en-US
33