Technical Safety - Miele SLQL0 Mode D'emploi

Aspirateur-robot
Masquer les pouces Voir aussi pour SLQL0:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

en - IMPORTANT SAFETY INSTRUCTIONS

Technical safety

The robot vacuum cleaner operates at 14.4 V.
It is classified as a class III appliance.
This appliance is supplied by a safety extra-low voltage (SELV)
power source where the voltage is low enough to protect users from
the risk of electrical shock. A Class II plug-in power supply is used
for supplying power to charge the robot vacuum cleaner.
Before each use of the robot vacuum cleaner, check both the vac-
uum cleaner and all of the accessories supplied with it for any visible
signs of damage. Do not use a damaged appliance or component.
The electrical outlet must be fitted with a 15 A fuse.
Compare the connection data on the data plate of the robot vac-
uum cleaner and the power supply (voltage and frequency) with that
of the mains electricity supply. This data must match exactly.
Reliable and safe operation of this robot vacuum cleaner can only
be assured if the base station has been connected to the mains
electricity supply.
While the vacuum cleaner is under warranty, repairs should only
be performed by a Miele-authorized service technician. Otherwise
the warranty will be void.
Repairs should only be carried out by a Miele-authorized service
technician. Repairs and other work by unqualified persons can cause
considerable danger to users.
Make sure that the power cord is not damaged, bent or twisted.
Do not place any heavy items on top of it.
Do not let the robot vacuum cleaner travel over the power cord or
other cords.
Only use the parts supplied for charging the rechargeable battery
(adapter, power unit and base station).
6

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Scout rx2

Table des Matières