Cleaning The Front Wheel; Cleaning The Sensors; Changing The Batteries In The Remote Control; Replacing The Rechargeable Battery - Miele SLQL0 Mode D'emploi

en-US
The arrow points to the  symbol.

Cleaning the front wheel

Clean the front wheel as required. For
this you will require the cleaning tool
which is located at the top of the dust
box lid.
 Place the robot vacuum cleaner up-
side down on a level, clean surface.
 Unclip the cover.
 Remove the front wheel.
 Remove any threads and hair and
clean the front wheel, the cover, and
the slot depression using the cleaning
tool.
 Refit the front wheel and close the
cover making sure it clicks into posi-
tion.

Cleaning the sensors

Clean the sensors as required.
 Place the robot vacuum cleaner up-
side down on a level, clean surface.
26
 Clean the sensors carefully using a
dry cotton wool bud.
Changing the batteries in the remote
control
The remote control requires two AAA
(1.5 V) batteries.
 Remove the battery compartment
cover.
 Replace the batteries. Make sure the
polarity is correct.
 Close the battery compartment cover.
 Observe the special instructions re-
garding the handling and disposal of
batteries found in the sections "IM-
PORTANT SAFETY INSTRUCTIONS"
and "Caring for the environment" at
the beginning of these operating in-
structions.

Replacing the rechargeable battery

You will require an original Miele lithium-
ion rechargeable battery:
– YCR-M05 for Scout RX2
– YCR-MT12 for Scout RX2 Home Vi-
sion
The rechargeable battery compartment
is located in the robot vacuum cleaner's
storage compartment.
 Remove the dust box.