Cleaning The Roller Brush - Miele SLQL0 Mode D'emploi

en-US
 Place the robot vacuum cleaner up-
side down on a level, clean surface.
 Use both hands to grip two opposite
bunches of the side brushes and pull
them out.
 Remove threads and hair using the
wiper which is located on the bottom
of the cleaning tool.
 Hold the wiper over a garbage can.
 Press the button at the top of the
wiper several times until all threads
and hair have fallen out.
 Press the two identical cleaned side
brushes carefully onto their pins until
they audibly engage. Take care to
comply with the markings L and R.
In order to continue to achieve the
best possible cleaning results, re-
place the side brushes with new
ones after approx. one year.
24

Cleaning the roller brush

Clean the roller brush as required. For
this you will require the cleaning tool
which is located at the top of the dust
box lid.
 Place the robot vacuum cleaner up-
side down on a level, clean surface.
 Remove both side brushes, see pre-
vious description "Cleaning the side
brushes".
 Unlatch the roller brush cover and re-
move the cover.
 Remove the roller brush.
 Use a pair of scissors to cut any
threads or hairs that have wound
themselves around the roller brush.