Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Open the rechargeable battery com-
partment by unlatching the cover up-
wards.
Scout RX2 (YCR-M05)
Carefully pull the cables so that the
plug connection is pulled out of the
slot.
Press the latch on the plug connec-
tion in order to release the plug.
Remove the rechargeable battery.
Insert the plug of the new recharge-
able battery into the counterpart,
making sure it clicks into place.
Insert the rechargeable battery care-
fully, making sure it is properly posi-
tioned (see right-hand side of pic-
ture).
Store the plug connection in the slot
at the side.
Carefully refit the cover of the
rechargeable battery compartment
and close it, making sure it clicks into
place.
Observe the special instructions re-
garding the handling and disposal of
the old rechargeable battery found in
the sections "IMPORTANT SAFETY
INSTRUCTIONS" and "Caring for the
environment" at the beginning of
these operating instructions.
Scout RX2 Home Vision (YCR-MT12)
Carefully remove the rechargeable
battery until the plug connection is
exposed.
Press the latch on the plug connec-
tion in order to release the plug.
Insert the plug of the new recharge-
able battery into the counterpart,
making sure it clicks into place.
Store the plug connection in the side
recess.
Insert the rechargeable battery care-
fully, making sure it is properly posi-
tioned (see right-hand side of pic-
ture).
en-US
27
Publicité
Chapitres
Table des Matières
