Standard Equipment; Pw Iw; Optional Accessories; Pw Iw - Pw Iw 8 - Corghi PW IW 6 Manuel D'utilisation

STANDARD EQUIPMENT

950230798 Block pack
950331770 4 foot plates
950415435 KOMOL SR 220 oil (1 Kg)
900600674 Hexagonal wrench 6753 CH5

OPTIONAL ACCESSORIES

807233684 Pneumatic splicer kit
807233685 Splicer kit

NORMAL OPERATING CONDITIONS

WARNING
Get to know your machine : your familiarity with its exact operation is the best guar-
antee of safety and performance.
Learn the set up of all controls and their functions.
Make a thorough check to ensure correct functioning of every machine control de-
vice.
To prevent accidents and personal injury, all the equipment must be correctly installed,
correctly operated and correctly serviced.
The PW cone-to-cone machine has been designed exclusively for cone-to-cone wind-
ing operations, using the instruments it is equipped with, according to the instructions
reported in this manual..
WARNING
Any use of the machine other than the described use is to be considered as improper
and unreasonable.
WARNING
It is advisable to use only CORGHI original tools for the work.
Fig. 5 shows correct operator position during loading and unloading of the cones.
WARNING
To stop the machine under emergency conditions:
- turn off the emergency switch
- disconnect the power supply plug;
- cut off the compressed air supply network by disconnecting the shut-off valve (snap
coupling).
32

PW IW

PW IW - PW IW 8"

PW IW 6" 8" 10" operator's manual