Hendi 630402 Mode D'emploi page 3

Dear Customer,
Thank you for purchasing this Hendi appliance. Please read this manual carefully before connecting the
appliance in order to prevent damage due to incorrect use. Read the safety regulations in particular very
carefully.
Special safety instructions
• Check for damaged parts. Before using the French
fries cutter, check that all parts are included in the
package, and that any moving parts are operating
properly for performing the intended functions.
Check for alignment of moving parts, binding of
moving parts, and any other conditions that may
affect the operation.
• Read all directions on how to assemble this French
fries cutter, before attempting to use or clean.
French fries cutter parts
No. Description
1 Feed Frame Assembly
2 Handle
3 Connecting Plate Assembly
4 Slide Bar Assembly
5 Rubber Foot Assembly
6 Long Pin & C-clip
7 Slide Bar Cover Bushing
8 Short Pin & C-clip
Assembly
Unbox all parts
a. Cutter Base
b. Connecting Plate Assembly
c. Handle
d. Long Pin and Short Pin with C-clips (in place)
e. (1) 3/8" Cutting Plate (Pre-assembled)
f. (4) Large Suction Cup Feet (each has a Wing Nut
and Washer for attaching to Cutter Base)
• Be sure the c-clips are securely fastened to the
long and short pins and cutting plate is secure on
the end of the French fries cutter before making
fries.
• Beware! Keep fingers and loose clothing away
from moving parts! Injury may result!
• Keep children away. Never leave the french fries
cutter.
Optional cutting plates - 1/4" and 1/2" are available.
NL EN
3