Attaching And Storing The Model 505 Hose; Blanket Dispenser - 3M Bair Hugger 505 Manuel De L'utilisateur

8 English
Bair Hugger Model 505 Temperature Management Unit Operator's Manual
Insert flange in
groove and snap
into place
Figure G. Attaching the Model 505
unit hose
Attaching and Storing the Model 505 Unit Hose
The Model 505 unit has a unique "snap-fit" hose. This extended-length swivel hose, adapted for
241 fluid warming, attaches by inserting the flange end at a 45° angle in the grooved blower outlet
and "snapping" the hose into place.
Press the white tab on the blower outlet to release the hose.
When storing the Model 505 unit, insert the hose clip tab in the hanger slot near the blower outlet.

Blanket Dispenser

The blanket dispenser attaches to the unit and can store several Bair Hugger blankets. See the
package instructions for details.
Blanket Dispenser
Figure I. Temperature management
unit with blanket dispenser
Press this tab
to release hose
Hang hose clip tab
in this slot for storage
Figure H. Storing the Model 505 unit hose