HumanTechnik lisa Mode D'emploi page 9

Congratulations on purchasing your
radio flashing receiver. We hope it
will provide you with many years of
service. You have chosen a modern
and reliable system.
Please read the operating instruc-
tions through carefully to be able to
start the unit correctly and to fami-
liarise yourself with all of the
systems features.
Functional principle
The radio flashing receiver receives
signals from a variety of radio trans-
mitters and converts them into light
signals. The radio flashing receiver
has a very high-power light-emitting
diode (LED), which brings a signal to
the user's attention, and additional
LEDs which indicate the nature of
the incoming signals.
Included in the standard
package:
- radio flashing receiver
- 9 V block battery
- 9 V plug-in PSU
- Stand
- Operating Instructions
- Warranty card
If any parts are missing please
immediately contact your dealer or
the manufacturer directly.
Setting up the system –
1. Inserting the battery
There is a battery compartment on
the back of the radio flashing recei-
ver. Open it by sliding the cover of
the battery compartment to the right
of the receiver using your thumb.
Connect a 9 V block battery to the
connector plug, place the battery
into the recess and close the recei-
ver again. When the battery is con-
nected, the receiving signals may be
triggered once.
2. Setting the correct radio
channel
A special digital transmission pro-
cess ensures that the radio signals
are picked up without errors. This
process also makes it possible to set
10 different radio channels.
English 9