9. 4-way Manual Lock
The manual lock has 4 positions which control the opening of the flap in either direction.
The unit is shipped in position 4 (locked both directions) to keep the flap secure in transit.
This should be changed to position 1 before programming.
Note that the door of the DualScan cat flap must hang straight down when you
move the lock as it engages with the bottom of the door.
Position 1 – Fully open
Cat is allowed to enter and exit the house. This is the
standard position for normal operation of the flap.
Position 2 – Exit only
Cat is allowed to exit the house, but prevented from
entering the house.
Position 3 – Enter only
Cat is allowed to enter the house, but prevented from
exiting the house. This mode is useful if you need to keep
your cat in e.g. to take him to the vet.
Position 4 – Fully locked
Cat is prevented from entering or exiting the house.
19