Mounting The Exhaust Hood On The Side Walls; Mounting The Exhaust Hood On The Back Wall - Pelgrim MWA130 Notice D'utilisation

3 Installation
Mounting preparation
Choose the exhaust outlet (B1 of B2) and open it up by removing the perforated plate.
Attach the plastic connecting piece on the opened exhaust outlet. The connecting piece
has a bayonet joint.

3.2 Mounting the exhaust hood on the side walls

Check whether the cabinets are secure. Use
drilling jig N2 to determine the mounting
holes. The top of the jig is equal to the top of
the exhaust hood. The top of the jig is at the
same level as the exhaust hood without panel
door.
38
3 Installation
Drill the mounting holes in the cabinets.
Filling pieces are provided in order to mount the exhaust hood
to the cabinets to a thickness of 16 mm. The supplied angle
steel (Q) can be used to fill in the space at the back between
the exhaust hood and the wall.
3.3 Mounting the exhaust hood onto the back wall
Use drilling jig N1 to determine the mounting holes. The top of the jig is equal to the top
of the exhaust hood.
1. Drill the holes and attach the wall brackets (R) to the wall by using plugs and screws.
2. Slide the suspension brackets into the exhaust hood from the back.
3. Secure the bracket by using the supplied screws and locking rings.
4. Turn a socket screw in the suspension brackets. You can use this later to determine the
height.
5. Hang the hood onto the wall brackets. The hood is adjustable in height and depth by
using the adjusting screw or by sliding the brackets further in or out.
39