Mounting The Canopy Hood - Pelgrim PSK985E Notice D'utilisation

5 Installation

5.2 Mounting the canopy hood

First, fix brackets (A) to the hood with
the screws provided determine the
position and distance with regard
to the mounting brackets. Mark the
holes that must be drilled and drill
the holes.
If a recirculation system is used,
mount the recirculation kit (K) instead
of a duct.
Fix brackets (B) to the wall with the
plugs and screws provided.
Screw the hood to the wall with the
plugs and screws (C) provided.
On the back of the canopy hood are
2 holes with a diameter of 8 mm for
the 2 plugs/screws (D) to fix the hood.
Fix the connection ring (E) with the screws provided.
Connect the duct.
Fit the short cylinder to the mounting bracket (B) and pull the long cylinder to the
top of the canopy hood.
41