OPERATION
Switching on the hob and setting the power
Pan detection
Switching off the hob
GB 12
The power has 9 settings.
• Put a pan on a cooking zone.
• Touch the On/Off button.
You will hear a short bleep and the display for each cooking zone
will show '0.'. If no further action is taken, the cooking zone will
automatically switch off after 10 seconds.
• Touch the + button of the desired cooking zone once to activate
the cooking zone.
The dot indication for this zone will stop flashing and the other dots
will dissappear.
• Use the + button or the - button to choose the correct setting. The
hob will automatically start in the chosen setting (if it detects a pan).
The power setting of the active cooking zone is displayed. The
zones that are not active will show '0'.
▷ Touching the + button for the first time displays setting '1.'.
▷ Touching the - button for the first time displays setting '9.'.
Tip
You can touch and hold the + or the - button to set the desired power
faster.
If the hob does not detect a (ferrous) pan after the cooking power has
been set, the display will show the pan detection symbol and the hob
will remain cold. If a (ferrous) pan is not placed on the cooking zone
within 1 minute, the cooking zone will automatically switch off (see also
page 10 and 11 'Pans').
Switching off one cooking zone
The cooking zone is switched on. The display shows a power setting
between 1 and 9.
• Touch the + button of the cooking zone to activate the zone.
The dot indication will appear in the display to indicate that this
zone is active.