Petra electric KM 45 Mode D'emploi page 76

Part 1 – Decalcifying
DE
1. Set the red knob (
for coffee or hot water.
GB
2. Ensure that the empty pad cassette
has been pushed in and turn the knob
(17) to position
FR
3. Place an at least 1.8 litre container
(e. g. pot) in the middle of the grated
support.
4. Turn the machine by pressing the On/
Off button
5. After turning the machine on, push
both buttons (12) and (16) at the same
time and hold them until the pump
starts. The decalcification program
runs and the calcification indicator
(14) is illuminated the entire time. Af-
ter approximately 35 minutes, the first
part of the decalcification program
has been completed. The fill level
indicator
Part 2 – Rinsing
1. Fill the water tank up to its
with tap water and put it back in the
machine.
2. Place the empty container back on
the middle of the grated support.
3. Press the start/stop button
illuminated in green. The rinse cycle
will start.
4. As soon as the fill level indicator
blinks again, rinse again. To do so,
repeat steps 1. to 3. After the second
rinse cycle, the machine will turn off.
5. Turn the adjusting knob (
the initial position
water has been dispensed.
34
15) to the symbol
.
(12).
(11) blinks.
max mark
(16)
17) back to
as soon as all
(11)
11 12 14 15
16 17