Basic Cleaning - Petra electric KM 45 Mode D'emploi

Basic cleaning

1. Pull the milk frother (
of the steam dispenser (24) and com-
pletely disassemble the milk frother.
2. Clean the milk tube (
(20), mixing piece (21) and froth
nozzle (22) in dishwater using a soft
brush. Afterwards, dry those com-
ponents thoroughly. Alternatively,
you can also place the parts in the
cutlery basket of your dishwasher. In
the process, ensure that no parts are
lost. An air duct (23) is located on the
tube adapter. Take special care when
cleaning it.
3. Reassemble the milk frother.
Push the tube adapter into the mi-
xing piece until it locks into place.
Otherwise, milk and steam will spray out
when frothing and the frother won't work
properly.
4. Ensure that the red steam nozzle (
is screwed on tightly on the steam
dispenser (24).
5. Mount the complete milk frother from
the bottom until it locks into place on
the steam dispenser.
If you follow the aforementioned
instructions, you will create a milk
froth portion of at least 1/3.
18) down and off
19), tube adapter
24)
24 25
19 20
23
✕
DE
GB
18
21
22
✔
FR
23