Setup And Start-Up; Setting Up The Machine; Start-Up - Petra electric KM 45 Mode D'emploi

Setup and start-up

DE
GB

Setting up the machine

FR 1. Stow the excessive connector cord
which you don't need on the bottom
of the machine.
2. Place the machine on a level and sta-
ble base that is not sensitive to water.
The machine may not be used in
areas that are more than 1500 m
above sea level.
3. Pull the protective foil off of the gra-
ted support (4). Do not use any sharp
objects for this in order to prevent
damaging the surface.
4. Connect the mains plug to a socket
with earthing contact.

Start-up

When using the machine for the first
time, the pump will first take in air and
emit a loud noise.
1. Turn on the machine using the On/Off
button
start/stop button (16) will illuminate
in red. As the water tank is still empty,
the fill level indicator
2. Tilt the water tank to the outside, then
lift it up and out of the machine.
3. Remove the accessories packed in
the tank.
4. Take out the suction cap (
it firmly on the support ring on the bot-
tom of the water tank. Ensure that the
arrow on the suction cap is pointing
towards the float capsule (8).
10
(12). Shortly afterwards, the
(11) will blink.
9) and mount
11 16 12
4
9 8