Petra electric KM 45 Mode D'emploi page 68

Performing a rinse cycle
DE
1. Rinse the water tank out.
putting on the tank lid, check whether
GB
the suction cap (9) has been properly
mounted.
2. Fill the water tank up to its
FR
(7) through the fill opening on the tank
lid and then put it back in the machi-
ne.
3. Set the right knob (
for coffee or hot water.
4. Ensure that the empty pad cassette
has been pushed in and turn the ad-
justing knob (17) to position
5. Place an at least 0.5 litre container in
the middle of the grated support and
insert the milk tube (19).
6. Turn the machine on with the On/Off
button
buttons (12) and (16) at the same
time.
The entire boiler will then be rinsed.
Then water is sucked out of the
container through the milk frother (18)
using steam.
7. Set the adjusting knob (
the initial position
dispensing process has ended.
26
Before
max mark
15) to the symbol
(12) and then press both
17) back to
as soon as the
.
19
16 12 17 15
7