Setting The Water Hardness - Petra electric KM 45 Mode D'emploi

Setting the water hardness

DE
When setting the water hardness,
GB
do not pause for longer than 10
seconds. The machine will otherwise
automatically turn off and will keep the
FR
previously set value. You can check the
setting at any time by performing the
steps 1. and 2.
1. The machine is deactivated.
2. Hold the start/stop button
(3 to 4 seconds) until the calcification
indicator
setting will be indicated by the number
of pulses.
3. Press the start/stop button
Every time you press the button, the
setting will change.
4. Press the On/Off button
correct water hardness has been set.
Only once this has been done, will it
be saved!
30
(16) down
(14) lights up. The current
again.
(12) if the
Signal flash Hardness
in °dH
· · · 0–7
·· ·· ·· >7–14
··· ··· ··· >14–21
···· ···· ···· >21
16 12
Ca and Mg
in mmol/l
<1.3
>1.3–2.5
>2.6–3.8
>3.8
14