Control Panel; Indicator Lights - Zanussi ZDF3020 Notice D'utilisation

• Do not change the specifications or modify this prod-
uct. Risk of injury and damage to the appliance.
• Do not use the appliance:
– if the mains cable or water hoses are damaged,
– if the control panel, worktop or plinth area are dam-
aged, that you can get access to the inner side of
the appliance.

Control panel

1 Programme knob
2 Start/cancel button (Start/Cancel)
3 Multitab button (Multi Tab)
4 Delay start button (Delay)
5 Digital display
6

Indicator lights

7 Programme marker
8 Off position
Wash phase
Dry phase
Multitab
1)
Salt
Indicator lights
Comes on when the washing phase or the rinsing phase operates.
Comes on when the drying phase operates.
Comes on when you activate the multitab function Refer to 'Multitab function'.
Comes on when it is necessary to fill the salt container. Refer to 'Use of dishwasher
salt'.
After you fill the container, the salt indicator light can continue to stay on for some
hours. This does not have an unwanted effect on the operation of the appliance.
Contact your local Service Force Centre.
• Do not drill into the sides of the appliance to prevent
damage to hydraulic and electrical components.
Warning! Carefully obey the instructions for
electrical and water connections.
1
8 7 6 5
2 3 4
53