Control Panel - Zanussi ZDT200 Mode D'emploi

• Do not change the specifications or modify this prod-
uct. Risk of injury and damage to the appliance.
• Do not use the appliance:
– if the mains cable or water hoses are damaged,
– if the control panel, worktop or plinth area are dam-
aged, that you can get access to the inner side of
the appliance.

Control panel

1 On/off button
2 Delay start button
3 Programme selection/cancel button / (Cancel)
4 Indicator lights
5 Programme indicator lights
1)
1)
1) The indicator light is off while a washing programme operates.
Contact your local Service Force Centre.
• Do not drill into the sides of the appliance to prevent
damage to hydraulic and electrical components.
Warning! Carefully obey the instructions for
electrical and water connections.
Indicator lights
The indicator light comes on when the washing pro-
gramme is completed. Auxiliary functions:
• Level of the water softener.
• Activation/deactivation the audible signals.
• An alarm if the appliance has a malfunction.
The indicator light comes on when it is necessary to fill
the rinse aid. Refer to the chapter 'Use of rinse aid'.
The indicator light comes on when it is necessary to fill
the salt container. Refer to the chapter 'Use of dishwasher
salt'.
The salt indicator light can stay on for some hours, but
it does not have an unwanted effect on the operation of
the appliance.
19