Control Panel; Indicator Lights - Zanussi ZDT101 Notice D'utilisation

• Do not change the specifications or modify this prod-
uct. Risk of injury and damage to the appliance.
• Do not use the appliance:
– if the mains cable or water hoses are damaged,
– if the control panel, worktop or plinth area are dam-
aged, that you can get access to the inner side of
the appliance.

Control panel

1 On/off button
2 Half-load button
3 Programme selection/cancel button (Cancel)
4

Indicator lights

5 Programme indicator lights
Programme in progress
Salt
1)
18
Contact your local Service Force Centre.
• Do not drill into the sides of the appliance to prevent
damage to hydraulic and electrical components.
Warning! Carefully obey the instructions for
electrical and water connections.
1 2 3
A B
Indicator lights
– Comes on when you select a washing programme.
– Stays on for all the duration of the washing pro-
gramme.
– Goes off at the end of the washing programme.
The indicator light comes on when it is necessary to fill
the salt container. Refer to the chapter 'Use of dishwasher
salt'.
The salt indicator light can stay on for some hours, but
it does not have an unwanted effect on the operation of
the appliance.
5 4