Setting Mode - Zanussi ZDF3020 Notice D'utilisation

1)
Rinse aid
1) When the salt and/or rinse aid containers are empty, the related indicator lights do not come on while a washing programme
operates.
Programme knob
• To switch on the appliance or to set a washing pro-
gramme, turn the programme knob clockwise or coun-
terclockwise. The programme marker on the pro-
gramme knob must agree with one of the washing pro-
grammes on the control panel. If the programme mark-
er agrees with a washing programme, the digital dis-
play shows the time duration of the programme. If the
programme marker does not agree with a washing
programme, the digital display shows two horizontal
bars.
• To switch off the appliance, turn the programme knob
until the programme marker agrees with the off indi-
cator.
Use the programme knob for these operations:
– To set the water softener. Refer to 'Setting the water
softener'.
– To deactivate/activate the rinse aid dispenser. Refer to
'Multitab function'.
Start/cancel button
Use the start/cancel button for these operations:
• To start the washing programme. Refer to the chapter
'Setting and starting a washing programme'.
• To cancel a washing programme in progress. Refer to
the chapter 'Setting and starting a washing pro-
gramme'.
• To set the water softener level. Refer to the chapter 'Set
the water softener'.
• To deactivate/activate the rinse aid dispenser. Refer to
the chapter 'Multitab function'.
Multitab button
Press this button to activate/deactivate the multitab func-
tion. Refer to the chapter 'Multitab function'.
Delay start button
Use the delay start button to delay the start of the washing
programme with an interval between 1 and 19 hours. Refer
54
Indicator lights
Comes on when it is necessary to fill the rinse aid container. Refer to 'Use of rinse aid'.
to the chapter 'Setting and starting a washing pro-
gramme'.
Digital display
The display shows:
• Adjusted level of the water softener.
• Activation/deactivation of the rinse aid dispenser (only
with multitab function on).
• Programme duration.
• Remaining time to the end of the programme.
• End of a washing programme, the digital display shows
a zero.
• Number of hours in delay start.
• Fault codes.

Setting mode

The appliance is in setting mode when:
• One or more phase indicator lights are on.
• The time duration of the programme flashes in the
digital display.
The appliance must be in setting mode for these opera-
tions:
– To set a washing programme.
– To set the water softener level.
– To deactivate/activate the rinse aid dispenser.
The appliance is not in setting mode when:
• One or more phase indicator lights are on.
• The time duration of the programme does not flash.
In this condition cancel the programme to go back to the
setting mode. Refer to the chapter 'Setting and starting a
washing programme'.