Control Panel; Indicator Light; Programme Selection/Cancel Button - Zanussi ZDT110 Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

• Do not change the specifications or modify this prod-
uct. Risk of injury and damage to the appliance.
• Do not use the appliance:
– if the mains cable or water hoses are damaged,
– if the control panel, worktop or plinth area are dam-
aged, that you can get access to the inner side of
the appliance.

Control panel

1
On/off button
2
Programme selection/cancel button /(CANCEL)
3

Indicator light

4
Programme indicator lights

Programme selection/cancel button

Use the programme selection/cancel button for these op-
erations:
• To set the washing programme. Refer to the chapter
'Setting and starting a washing programme'.
• To set the water softener. Refer to the chapter 'Setting
the water softener'.
18
Contact your local Service Force Centre.
• Do not drill into the sides of the appliance to prevent
damage to hydraulic and electrical components.
Warning! Carefully obey the instructions for
electrical and water connections.
4
1
2
A
B
Indicator light
The indicator light comes on when the washing pro-
gramme is completed. Auxiliary functions:
• Level of the water softener.
• Activation/deactivation of the audible signals.
• An alarm if the appliance has a malfunction.
• To deactivate/activate the audible signals. Refer to the
section 'Audible signals'.
• To cancel a washing programme in progress. Refer to
the chapter 'Setting and starting a washing pro-
gramme'.
3

Publicité

Table des Matières
loading

Table des Matières