Call Timer; Muting The Microphone - switel DET 3371 Mode D'emploi

4 Telephoning
Taking a call
Your phone is ringing.
Press the Off Hook key or the hands-free key.
/
Making a call
Enter the phone number.
Delete wrong characters by pressing
The phone number is being dialled.
/
☞
You can also press the Off Hook key and you will hear the dialling
tone. The entered number will be dialled immediately. It is not possible to
correct wrong digits individually using this dialling procedure.
Ending a call
Press the On Hook key or replace the handset in the base station.
/

Call timer

Your handset automatically times the duration of every call.
Setting the earpiece/loudspeaker volume
During a call you can adjust the volume in 5 levels (if telephoning "nor-
mally" -> earpiece volume, with hands-free -> loudspeaker volume).

Muting the microphone

During a call you can switch your handset's microphone off. The dis-
play shows .
To unmute press again.
Redial
☞
Your handset saves the last 3 dialled telephone numbers.
Viewing/dialling telephonenumbers
The handset is in idle state.
... press repeated (if necessary) until the desired telephone number is
displayed.
... the phone number is being dialled.
/
☞
Did you already pressed the Off Hook key and can hear the dialling
tone, the very last dialled telephone number is dialled by pressing the
redial key.
.
Storing telephone numbers
... the desired telephone number is displayed (see above).
... press and hold for about 2 seconds. You can edit the telephone
number. Press briefly to delete the last character or press and
hold to delete the whole entry. You can enter a dialling pause (approx.
3 s) by pressing .
... press again and enter the memory location (0...9).
... press again to return to idle state.
Call list
☞
Your handset saves the numbers of the last 20 incoming calls in the
call list. Saving can only take place if the function "Phone number transmis-
sion (CLIP)" is available at your connection and caller ID is not suppressed
by the caller or was not transmitted for any other reason.
If the list is empty, nO is shown on the display.
New calls are signalled with the flashing
Viewing/dialling telephonenumbers
The handset is in idle state.
Open the call list. The telephone number of the very last call is dis-
played. For numbers longer than 12 digits press
hidden digits.
Press to view date and time of the call (Only when the network
sends the time/date together with the telephone number / depending
on your network provider).
... press repeated, to get to other entries.
... the displayed telephone number is being dialled.
/
Deleting telephone numbers
... the desired telephone number is displayed (see above).
... press and hold for about 3 seconds. The entry will be deleted.
Storing telephone numbers
... the desired telephone number is displayed (see above).
... press and hold for about 2 seconds. You can edit the telephone
number. Press briefly to delete the last character or press and
hold to delete the whole entry. You can enter a dialling pause (approx.
3 s) by pressing .
... press again and enter the memory location (0...9).
... press again to confirm.
icon.
to display the
GB
3