Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
7 7 7 7
OPERATION
OPERATION
OPERATION
OPERATION
7.1
System configuration
The choice of a system configuration should be the result of an electro-acoustic study conducted by an expert (System
Engineer or Audio Consultant). However, this will not be discussed here as sound-design aspects are beyond the scope
of this manual. This study can rely on the simulations modeled in SOUNDVISION software, yielding electro-acoustic
predictions which take into account the enclosures' manufacturer data and particular situational usage, as well as the
projected environment.
Three operation modes (FULL RANGE, HIGH-PASS, and LOW EXTENSION), each one associated with a set of
factory presets, will allow building all the common configurations (C, LR, LCR, distributed...).
®
The KARA
enclosures can be used as a standalone system in the FULL RANGE mode or as a reinforcement system in
the HIGH-PASS mode or in combination with L-ACOUSTICS
mode.
ALWAYS check that the KARA enclosures are connected to correct LA8 output channels before operating.
CAUTION
Note: The latest version of the LA8 PRESET LIBRARY is downloadable from the L-ACOUSTICS
7.2
FULL RANGE mode
7.2.1
Description
In FULL RANGE mode KARA operates within its nominal bandwidth (55 Hz – 20 kHz) for standalone applications not
requiring low frequency extension.
KARA_UM_ML_1-3
Figure 5: Standalone KARA line source system example
w w w . l - a c o u s t i c s . c o m
®
SB18 or SB28 subwoofers in the LOW EXTENSION
[KARA]
EN
®
web site [3.4].
11 en
11
11
11
Publicité
Chapitres
Table des Matières
