HYDAC ELECTRONIC EDS 8000 Notice D'utilisation page 30

8
Description
Yes
No
Reset Min-/Max-value
Programming lock
Calibrations of sensors zero point
E
New
Version
Note:
• If the actual pressure exceeds the instrument's nominal pressure it can no
longer be displayed. The nominal pressure flashes in the display. As a result,
when the menu point Max Value (Hi) is selected, the value of the highest
measured pressure which has been stored flashes until the instrument is reset
by "reset Min-/Max-value" (re.HL) or "reset" (rES).
• If the actual pressure is less than 0.6 % of the nominal range, 0 bar is
displayed.
Status: 04.04.2018
Representation on 7-
segment display
yes
no
rS. k L
Pr6
CALi
nEU
Uer
HYDAC ELECTRONIC GMBH
EDS 8000
ASCII representation
Yes
No
rS.HL
PrG
cALi
nEU
Ver
Part No.: 669758