Controls, Indicators And Connections; Inspection Prior To Starting; Starting Up; Shaking The Main Filter - Nilfisk ALTO ATTIX 110 Notice D'utilisation

ATTIX 110
Dimensions (fig. 3)
Model
A (mm)
B (mm)
C (mm)
Kg ()
() Net weight.

Controls, indicators and connections

See fig. 4.
A - Dust container release lever
B - Castor lever
C - Manual filter shaker knob
D - Start/stop switches
E - Start/stop switch (version for vacuuming liquids)
F - "Power on" indicator light

Inspection prior to starting

Prior to starting, check that:
- the filter is installed;
- all latches are tightly locked;
- the vacuum hose and the accessories have been
correctly fitted into the inlet "A" (fig. 5);
- the bag or safety container is installed, if
applicable.
- Do not use the vacuum cleaner if the filter is faulty.

Starting up

- Lock the castor brakes before starting the vacuum
cleaner "A" (fig. 6).
GB
ATTIX 110
780
670
,580
68
-8-
Starting/stopping the vacuum cleaner
Normal version
- Turn the switch "B" (fig. 6) to "I" position to start
the vacuum cleaner.
- Turn the switch to "0" position to turn the vacuum
cleaner off.
Version for vacuuming liquids
- Turn the switch "C" (fig. 6) to "I" position to start
the vacuum cleaner.
- Turn the switch to "0" position to turn the vacuum
cleaner off.

Shaking the main filter

Depending on the quantity of dust cleaned up, shake
the main filter by means of the knob "A" (fig.7).
DANGER !
Stop the vacuum cleaner before shaking the filter.
Do not shake the filter while the vacuum cleaner is
on, as this could damage the filter itself.
Wait before restarting the vacuum cleaner, to allow the
dust to settle.