Emergency Stopping; Emptying The Container; At The End Of A Cleaning Session; Maintenance And Cleaning - Nilfisk ALTO ATTIX 110 Notice D'utilisation

Emergency stopping

- Turn the switch "B" (fig. 6) to "0" position to start
the vacuum cleaner (normal version).
- Turn the switch "C" (fig. 6) to "0" position (version
for vacuuming liquids).

Emptying the container

DANGER !
Before proceeding with these operations, turn off
the vacuum cleaner and remove the plug from the
power socket.
- Before emptying the dust container it is advisable
to clean the filter (see "Shaking the main filter"
paragraph).
a) Normal version
- Release the dust container "A" (fig. 8), then
remove and empty it.
- Make sure that the gasket is in perfect condition
and correctly positioned.
- Place the container back in position and secure it
again.
b) Version for vacuuming liquids
- Make sure that the vacuum cleaner is equipped
with a liquid level sensor and is suitable for
vacuum liquids.
- Do not vacuum flammable liquids.
- If foam forms, turn off the vacuum cleaner
immediately and empty the container.
- The filter element will be wet after liquids have
been vacuumed.
- A wet filter element can quickly become clogged
if the vacuum cleaner is then used to vacuum dry
substances.
- For this reason, make sure that the filter element
is dry or replace it with another one before using
the vacuum cleaner for dry materials.

At the end of a cleaning session

 - Turn off the vacuum cleaner and remove the plug
from the socket.
2 - Wind the connection cable (fig. 9).
3 - Empty the container as described in the "Emptying
the container" paragraph. Clean the vacuum
cleaner as described in the "Maintenance and
cleaning" paragraph.
4 - Wash the container with clean water if aggressive
substances have been vacuumed.
5 - Store the vacuum cleaner in a dry place, out of
reach of unauthorized people.

Maintenance and cleaning

DANGER !
IMPORTANT: the precautions described below
must be taken during all the maintenance
operations, including cleaning and replacing
of the filter.
a) To allow the user to carry out the maintenance
operations, the vacuum cleaner must be
disassembled, cleaned and overhauled as far
as is reasonably possible, without causing
hazards for the maintenance staff or other
people.
IMPORTANT: compartments that are not dust-
tight must be opened with suitable tools
(screwdrivers, wrenches, etc.) and thoroughly
cleaned.
b) Carry out a technical inspection at least once
a year, e.g.: check the filter to find out whether
the air-tightness of the vacuum cleaner has
been impaired in any way and make sure that
the electric control panel operates correctly.
This inspection must be carried out by the
manufacturer or by a competent person.
DANGER !
Use only genuine spare parts supplied and
authorized by the manufacturer.
-9-
ATTIX 110
GB