Maintenance And Cleaning - Arneg Velden Twin self Manuel D'installation Et De Service

2 remove the spring
- remove the side lock un-
screwing the fastening screws
3
- remove and replace the bulb
with an iden cal one
Upon comple on, you can supply power to the cabinets

22. Maintenance and cleaning

DANGER! Live parts. Electrocu on.
REMOVE THE ELECTRIC POWER SUPPLY BEFORE ANY OPERATION!
DO NOT wet, spray water or clean directly the electrical parts of the cabinet (fans, inte-
rior ligh ng, electrical cables etc. )
DO NOT touch the cabinet with wet or damp hands and feet.
CAUTION! Cold surfaces. Injuries, burning. Glass breakage.
Wait for the glass parts to reach room temperature.
DO NOT use hot water on the cold glass surfaces.
Protect the hands with work gloves.
i
The products will damage due to germs and bacteria.
Respect of the Hygiene Standards and the cold chain is indispensable to guarantee the pro-
tec on of the consumer's health.
The cleaning opera ons must include:
Step Name
1 Washing
2 Sani za on
3 Rinsing
4 Drying
05060161 00 08-04-2015
roughing, removal of approximately 97% of the dirt)
cleaning+disinfec on:
- cleansing: removal of visible dirt
- disinfec on : removal of pathogenic micro-organisms that remain
a er washing
Descrip on
Velden
English
41