Attaching The Belt Clip; Charging The Batteries; Private Branch Exchanges - switel DCT537X Mode D'emploi

Putting the Telephone into Operation

Attaching the belt clip

Press the belt clip on the rear
side of the handset at the top
until it audibly snaps into place
on the sides.

Charging the batteries

When the handset is properly inserted in the base station / charging
station, the charge control lamp lights up. The handset warms up
during the charging process. This is normal and does not represent
a risk. Do not charge the handset with charging units from other
manufacturers. The current battery charge status is indicated in
the display:
Setting the weekday and time on the answering machine
The information on Page 136 explains how to set the weekday and
time on the answering machine.

Private branch exchanges

If you want to connect the telephone to a private branch exchange,
more information is provided on Page 142.
124
78
Before the handset is used for the first time, insert it in the
base station / charging station for at least 14 hours.
Full Half empty Low Empty