Pabx / Supplementary Services; R−Button On Private Branch Exchanges; Dialling Pause - switel DCT537X Mode D'emploi

PABX / Supplementary Services

7 PABX / Supplementary Services
R−button on private branch exchanges
If the telephone is connected to a private branch exchange, all the
functions associated with the R−button, such as transferring calls,
automatic call back, etc., can be used. Refer to the operating ma-
nual provided with your private branch exchange as to which Recall
time (Flash time) must be set in order to use these functions. The
dealer where you purchased the exchange can provide information
as to whether the telephone will work properly with the exchange.
Setting the Recall (Flash) time . Pages 144 and 145.

Dialling pause

When using private branch exchanges, it is necessary to dial a spe-
cific number to obtain the dialling tone for an outside line. When
using some older private branch exchanges, it takes a little time be-
fore the dialling tone becomes audible. In the case of such private
branch exchanges, a dialling pause can be inserted after the num-
ber for an outside line in order to continue dialling directly without
having to wait for the dialling tone.
J
After dialling the number for the outside line, the telephone then
waits a defined time before dialling the actual phone number.
R−button and supplementary services
Your telephone supports supplementary services provided by your
telephone network provider, such as brokering, call waiting and
conference facility. These supplementary services can be used by
implementing the R−button. Please contact your telephone network
provider regarding which Recall (Flash) time must be set to use the
supplementary services. Please contact the telephone network pro-
vider with regard to enabling the supplementary services. Setting
the Recall (Flash) time . Pages 144 and 145.
142
The pause can also be stored with the phone numbers in
the phone number memory.
Insert a dialling pause