switel DCT537X Mode D'emploi page 152

In Case of Problems
Problems
The batteries
are empty wit-
hin a short
time
The caller
number dis-
play (CLIP
does not func-
tion
The answering
machine does
not record any
messages
No memo can
be recorded
No remote ac-
cess functions
can be execu-
ted
1
CLIP: Calling Line Identification Presentation
152
Solutions
− The batteries are empty or defective.
− Place the handset in the base station pro-
perly. Clean the contact surfaces on the
handset and base station with a soft, dry
cloth.
− Place the handset in the base station for 14
hours.
− The caller number display function is a sup-
plementary service offered by telephone net-
1
) work providers. Contact your network provi-
der for further information.
− The caller has suppressed the transmission
of their phone number.
− Ensure that the answering machine is con-
nected correctly and switched on.
− Check whether the answering machine me-
mory is full. Delete messages from the me-
mory, if necessary. . Page 139
− Check whether the answering machine me-
mory is full. Delete messages from the me-
mory, if necessary. . Page 139
− Check that the correct security code has
been entered for the remote access.
. Page 140
− The telephone used for remote access must
be set to tone dialling.