Royal Catering RCBM-30C Manuel D'utilisation page 4

DE
8. WARTUNG
• Nach Gebrauch muss das Gerät gründlich gereinigt
werden.
• Gießen Sie 5 – 10 l Wasser mit einer Temperatur von
60°C für 15 Min. in das Gerät.
• Keine scharfen Gegenstände zum Entfernen
von Rückständen verwenden. Zum Reinigen
der Tanks einen weichen Lappen oder einen
Reinigungsschwamm zu Hilfe nehmen (es kann etwas
Essig verwendet werden).
• Rückstände im Boiler müssen vor dem nächsten
Verbrauch entfernt werden.
• Es können geeignete Reinigungsmittel verwendet
werden (bitte vorher prüfen, welchem Zweck diese
dienen).
• Die Elektroteile des Gerätes nicht mit Wasser in
Berührung bringen.
• Das Gerät nicht in Wasser tauchen.
• Das Gerät an einem trockenen Platz aufbewahren.
• Vor jeder Reinigung und Einstellung, dem Austausch
von Zubehör oder wenn das Gerät nicht benutzt wird,
muss der Netzstecker gezogen werden und das Gerät
vollständig abkühlen.
• Zur Reinigung des Geräts dürfen nur milde
Reinigungsmittel verwendet werden, die
Oberflächen, mit denen Lebensmittel in Kontakt
kommen, bestimmt sind.
• Lassen Sie nach jeder Reinigung alle Teile gut
trocknen, bevor das Gerät erneut verwendet wird.
9. PROBLEMLÖSUNGEN
Die Zutaten A: Die Pumpe durchspülen; dabei
verstopfen die das Rohr an den gekrümmten
Pumpe Schlauch anbringen
B: Die Pumpe zerlegen und die
Bestandteile entfernen.
Die Temperatur A: Mit dem Decken 1-2 Min. abdecken.
erreicht keine B: Die Temperatureinstellung ändern.
100°C
ERR-1 A: Temperatur von mehr als – 20°C
erscheint auf – Niedrigtemperaturwarnung.
dem Display B: Die Verbindung des Sensors hat
sich gelockert.
C: Den Boden des Geräts öffnen und
den Sensor prüfen. Wenn sich dieser
gelöst hat, wieder korrekt verbinden.
Das Gerät schaltet A: Die Heizkraft verringern.
sich während B: Das Sicherheitsthermostat (Über-
des Heizens von hitzungsthermostat) austauschen.
selbst aus
6
für
Rev. 02.08.2021
U S E R M A N U A L
TECHNICAL DATA
Parameter description Parameter value
Product name HOME BREW MESH
TUN 30L
Model RCBM-30CK RCBM-30C
Rated voltage [V~]/
230/50
Frequency [Hz]
Rated power [W] 2500
Volume [l] 30
Temperature range from 1°C to 110°C,
increments of 0.1°C
Time range [min] 0-120
Dimensions [mm] Ø360x670 with lid
Weight [kg] 6 5,8
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed
and manufactured in accordance with strict technical
guidelines, using state-of-the-art technologies
components. Additionally, it is produced in compliance
with the most stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement. The device
is designed to reduce noise emission risks to a minimum,
taking into account technological progress and noise
reduction opportunities.
LEGEND
The product satisfies the relevant safety
standards.
Read instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation (general
warning sign).
Electric shock warning.
The product is intended for contact with food.
ATTENTION! Hot surface, risk of burns!
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details may
differ from the actual product.
The original operation manual is written in German. Other
language versions are translations from the German.
Rev. 02.08.2021
EN
2. USAGE SAFETY
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury or even death.
The terms „device" or „product" are used in the warnings
and instructions to refer to HOME BREW MESH TUN. Do
not use in very humid environments or in the direct vicinity
of water tanks. Prevent the device from getting wet. Risk of
electric shock! Do not put your hands or other items inside
the device while it is in use! Do not cover the ventilation
openings!
2.1. ELECTRICAL SAFETY
a) The plug must fit the socket. Do not modify the plug
in any way. Using original plugs and matching sockets
reduces the risk of electric shock.
b) Avoid touching earthed elements such as pipes,
heaters, boilers and refrigerators. There is an increased
risk of electric shock if the earthed device is exposed
to rain, comes into direct contact with a wet surface
or is operating in a damp environment. Water getting
into the device increases the risk of damage to the
device and of electric shock.
c) Do not touch the device with wet or damp hands.
d) Use the cable only for its designated use. Never use it
and
to carry the device or to pull the plug out of a socket.
Keep the cable away from heat sources, oil, sharp
edges or moving parts. Damaged or tangled cables
increase the risk of electric shock.
e) If using the device in a damp environment cannot be
avoided, a residual current device (RCD) should be
applied. The use of an RCD reduces the risk of electric
shock.
f) Do not use the device if the power cord is damaged
or shows obvious signs of wear. A damaged power
cord should be replaced by a qualified electrician or
the manufacturer's service centre.
g) To avoid electric shock, do not immerse the cord, plug
or device in water or other liquids. Do not use the
device on wet surfaces.
h) The socket to which the device is connected must be
grounded.
i) Before disconnecting the device's plug from the
power supply, first switch off the device.
j) The electrical socket must be secured with a 16 A fuse.
2.2. SAFETY IN THE WORKPLACE
a) Make sure the workplace is clean and well lit. A messy
or poorly lit workplace may lead to accidents. Try
to think ahead, observe what is going on and use
common sense when working with the device.
b) Do not use the device in a potentially explosive
environment, for example in the presence of
flammable liquids, gases or dust. The device
generates sparks which may ignite dust or fumes.
c) If you discover damage or irregular operation,
immediately switch the device off and report it to
a supervisor without delay.
d) If there are any doubts as to the correct operation of
the device, contact the manufacturer's support service.
e) Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
7