Kalkhoff inpulse 2.0 Mode D'emploi page 53

You can select the sub-items using the
Pressing the button takes you to the respective sub-
item. By selecting the sub-item "Back" and the
to conirm, you are taken to the menu sub-item display
once more.
The information regarding the price, average con-
sumption and the uel type is necessary to enable
calculation of the money and CO
ison with the use of a car. This is displayed in the
main menu of the information area under "Overall
Chapter 7.3 "Display".
savings"
Fuel price: Under the sub-item "Fuel price", you can speci-
y the price of the uels petrol or diesel in euros and cents.
You can set this to a value in euros between 0 and 9 euros
and a value in cents between 0 and 99 cents by using the
/ buttons on the control panel to move in 1-euro and
1-cent steps respectively. Once you have conirmed both
values by pressing the
the menu sub-item display.
Fuel consumption Ø: You can enter the average uel con-
sumption which would arise rom the use of a car. You can
set the consumption in half-litre steps to between 0 and
20 litres. Navigate using the
button conirms your selection and then takes you back
to the menu sub-item display.
Fuel type: Under the sub-item "Fuel type", you can choose
between the options "Petrol" and "Diesel" by pressing
the / buttons. Pressing the
selection and then takes you back to the menu sub-item
display.
Power cost: Under the sub-item "Power cost", you can
speciy the price of electricity in cents (ct). You can set
this to a value of between 0 and 99 cents by using the
/ buttons on the control panel to move in 1 cent steps.
Pressing the button conirms your selection and then
takes you back to the menu sub-item display.
/ buttons.
button
saved in compar-
2
button, you are taken back to
/ buttons. Pressing the
button conirms your
Original User Manual | Pedelec Impulse 2.0 23