Drive - Kalkhoff inpulse 2.0 Mode D'emploi

Brightness: You can select the following values using the
/ button:
Very bright
Average
Very dark
The change in brightness is implemented immediately.
Pressing the button conirms your selection and then
takes you back to the menu sub-item display.
Language: You can choose to have the information shown
on the display in the following languages:
• Deutsch
• English
• Francais
• Nederlands
• Espanol
• Italiano
• Suomi
• Dansk
You can select the relevant language using the
tons. Tapping the button conirms your selection and
takes you back to the menu sub-item display.
Unit: Under the item "Unit", you can choose whether in-
formation on distance travelled and speed is displayed
in kilometres (km) or miles (mi). Use the
choose between kilometres (km) or miles (mph). Tapping
the button conirms your selection and then takes you
back to the menu sub-item display.

7.4.4.2 Drive

Choose rom the following using the
• Wheel circumference
• Shit Sensor
• Climb Assist
• Back
Conirm your selection by tapping the
taken back to the menu sub-item display.
Wheel circumference: You can set the "wheel circumfer-
ence" to any value between 1540 mm and 2330 mm by
pressing the
50%
the
back to the menu sub-item display.
45%
40%
35%
30%
"Standard"
5%
10%
15%
20%
Shit Sensor: Choose rom the following values using the
Conirm your selection by tapping the
/ but-
Climb Assist: Choose rom the following values using the
/ buttons to
Conirm your selection using the
/ button:
button. You are
/ buttons on the control panel. Tapping
button conirms your selection and then takes you
A change to the setting becomes necessary, for
example, when you have the tyres on your Pedelec
exchanged for some of a diferent size. In order
to continue to display the correct data, the new
wheel circumference must be entered.
/ button.
OFF 50 ms 100 ms 150 ms 200 ms 250 ms 300 ms
The Shit Sensor recognises gear shiting and
imperceptibly interrupts the power assist for rac-
tions of a second. This enables you to move more
smoothly and considerably faster through the
gears. The higher the value you set, the longer the
assistance is interrupted for, and the more time
there is for shiting gears.
/ button.
1 2 3
You can inluence the response time of the power
sensor with the Climb Assist. The lower the value
you set, the less responsive the system becomes.
The higher the value you set, the more dynamic
the system becomes, but beware a yo-yo efect.
Original User Manual | Pedelec Impulse 2.0
button.
4 5 6 7
button.
21