5.1.1 Removing the battery
1. Grip the battery by the handle, insert the key into
the lock and turn it anticlockwise. The battery is now
unlocked.
DOWN TUBE BATTERY
Unlocking the battery
2. a) Down tube battery: Grip the battery with both hands
and lit it forwards/upwards out of its holder. In do-
ing so, hold on tight to the battery to avoid dropping
it. Place the battery down on a suitable surface. This
should be dry, even and non-lammable.
b) Seat tube battery: Grip the battery by the handle
and remove it rom the Pedelec by tilting it sideways.
In doing so, hold on tight to the battery to prevent it
rom falling out.
DOWN TUBE BATTERY
Removing the battery
3. You should now remove the key and keep it in a safe
place to prevent it rom breaking of or being lost.
12
Original User Manual | Pedelec Impulse 2.0
SEAT TUBE BATTERY
SEAT TUBE BATTERY
5.1.2 Charging operation
Before charging the battery, read the directions on
the charger careully.
1. a) Down tube battery: Take the charger provided out
of its packaging and plug the mains plug into a socket
(230–240 V).
b) Seat tube battery: Take the charger provided and
the docking station out of their packaging and plug
the mains plug into a socket (230–240 V). Connect the
charger to the docking station. The LED in the charger
now lights up briely in red and then permanently in
green.
To charge the battery safely, the charger must be
placed on a suitable surface. This should be dry
and non-lammable.
Seat tube battery: The charger must be supported
on its four feet. This is the only way to ensure that
the hot air around the battery can dissipate via
the surrounding ventilation slots.
2. a) Down tube battery: Connect the plug of the charger
to the battery.
b) Seat tube battery: Put the battery in the holder of
the docking station. The LED in the charger lights up in
green.
SEAT TUBE BATTERY
Charging the battery
3. a) Down tube battery: The charging process begins. If
your charger has an LED, this lights up red. The bat-
tery is charged in ive stages. When charging of one