Battery Information System; Checking The Charge State; Checking The Capacity - Kalkhoff inpulse 2.0 Mode D'emploi

5.2

Battery information system

There is a display panel on the outer face of the battery
which includes ive LEDs and a battery key or push button.
The LEDs light up as soon as you press the battery key
or push button. Information about the charge state and
capacity of the battery is provided based on the number of
LEDs that light up and the way in which they light up.
DOWN TUBE BATTERY
Battery key

5.2.1 Checking the charge state

a) Down tube battery: Press the battery key briely, the
LEDs light up and display the current battery charge state.
DISPLAY
•••••
5 LEDs light up
••••
4 LEDs light up
•••
3 LEDs light up
••
2 LEDs light up
•
1 LED lights up
1 LED lashes
b) Seat tube battery: Press the push button briely, the
LEDs light up and display the current battery charge state.
SEAT TUBE BATTERY DISPLAY
•••••
5 LEDs light up
••••
4 LEDs light up
•••
3 LEDs light up
••
2 LEDs light up
•
1 LED lights up
1 LED lashes
5 LEDs lash quickly
1st LED lashes
quickly
14 Original User Manual | Pedelec Impulse 2.0
SEAT TUBE BATTERY
Push button
BATTERY CHARGE STATE
100–80%
80–60%
60–40%
40–20%
20–10%
10–0%
BATTERY CHARGE STATE
100–84%
83–68%
67–51%
50–34%
33–17%
16–0%
0% or overloaded *
Charging fault **
* All 5 LEDs lash quickly: The battery is a) empty and is
being switched of, or is b) overloaded.
a) If the battery is overloaded, it will switch back on ater
a short idle period and can then be used normally.
b) If the battery is empty, it will work once again briely
following a short period of rejuvenation and will then
switch back of. It must now be charged.
** The 1st LED lashes quickly: A charging fault is present.
Please take the battery to your specialist cycle shop.

5.2.2 Checking the capacity

a) Down tube battery: If you hold down the battery key for
roughly ive seconds, the LEDs show the current battery
capacity.
SEAT TUBE BATTERY DISPLAY
••••
4 LEDs light up
•••
3 LEDs light up
••
2 LEDs light up
•
1 LED lights up
1 LED lashes
b) Seat tube battery: If you press the push button for ive
seconds, the LEDs show the current capacity of the battery.
SEAT TUBE BATTERY DISPLAY
•••••
5 LEDs light up
••••
4 LEDs light up
•••
3 LEDs light up
••
2 LEDs light up
•
1 LED lights up
1 LED lashes
CAPACITY
approx. 81–100%
approx. 61–80%
approx. 41–60%
approx. 21–40%
approx. 0–20%
CAPACITY
100–97%
96–80%
79–60%
59–40%
39–20%
< 20%