5-Tone Signaling - Kenwood TK-2360 Mode D'emploi

5-tone Signaling is enabled or disabled by your dealer. This
function opens the squelch only when the transceiver receives
the 5 tones programmed in your transceiver. Transceivers that
do not transmit the correct tones will not be heard.
Note: Your transceiver functions include either 5-tone Signaling or
FleetSync {page 14}, but not both.
MAKING A SELCALL (SELECTIVE CALLING)
A Selcall is a voice call to a particular station or to a group of
stations.
1 Select your desired zone and channel.
2 Press the Call 1 or Call 2 key to transmit the 5-tone codes
assigned to them.
3 When you hear a response, continue the conversation by
pressing the PTT switch and speaking into the microphone.
RECEIVING A SELCALL
If enabled by your dealer, an alert tone will sound and the LED
will blink when a Selcall has been received.
To respond to the call, press the PTT switch and speak into the
microphone.
• To mute the speaker after squelch opens, press the key
programmed as Monitor.
• Your dealer can program the Monitor function to close again after a
specific time period elapses.
• If Transpond for 5-tone Signaling is programmed, an
acknowledgement signal is returned to the calling station.
• If Call Alert for 5-tone Signaling is programmed, an alert tone will
sound when the correct tones are received.
16

5-TONE SIGNALING