Kenwood TK-2360 Mode D'emploi page 25

SELCALL (SELECTIVE CALLING)
A Selcall is a voice call to a station or group of stations.
■ Transmitting
1 Select your desired FleetSync channel.
• Your dealer can program different ID codes on different
channels.
2 Press the PTT switch and begin your conversation.
■ Receiving
If enabled by your dealer, an alert tone will sound and the
LED will blink when a Selcall has been received.
To respond to the call, press the PTT switch and speak into
the microphone.
■ Identification Codes
An ID code is a combination of a 3-digit Fleet number and a
4-digit ID number. Each transceiver has its own ID.
PAGING CALL
1 Select your desired FleetSync channel.
2 Press the key programmed as Paging to transmit your PTT
List ID, to request a call.
STATUS MESSAGE
You can transmit pre-programmed Status messages by
pressing the keys programmed as Status 1 or Status 2.
Status messages are 2-digit codes ranging from 10 to 99
(80 ~ 99 are reserved for special messages).
15