Kenwood TK-2360 Mode D'emploi page 16

INSTALLING THE CHANNEL STOPPER
There are 3 types of stoppers available, depending on the
number of channels used (4 channel type: white, 8 channel
type: gray, and 12 channel type: black).
1 Set the Selector knob to channel 1, then pull the Selector
knob off the transciever.
• If the Selector is not positioned at channel 1, the Selector knob
may not install correctly and the channel may be unable to be
changed.
2 Insert the appropriate channel stopper.
3 Reinsert the Selector knob.
1
6
3
2