Kenwood TK-2360 Mode D'emploi page 21

■ Priority Channel Select
Press this key to set the currently selected channel as
the Priority channel. During Scan, the transceiver will
automatically change to the Priority channel when a call is
received on that channel, even if a call is being received on
a normal channel.
■ Scan
Press this key to toggle Scan ON and OFF. While
scanning, the transceiver checks for a signal on each
channel and only stops if a signal is present.
■ Scan Temporary Delete
When scan pauses at an undesired channel, you can
temporarily remove that channel from the scanning
sequence by pressing this key.
■ Scrambler
Press this key to toggle the Scrambler function ON and
OFF. The Scrambler allows you to hold conversations in
complete privacy by encrypting your transmitted signals.
■ Squelch Off
Press this key to hear background noise. Press this key
again to return to normal operation.
■ Squelch Off Momentary
Press and hold this key to hear background noise. Press
this key again to return to normal operation.
■ Status 1/ Status 2
Press the Status 1 or Status 2 key to transmit the status
message assigned to them.
Note: This key does not work on transceivers set up for 5-tone
signaling.
11