Kenwood TK-2360 Mode D'emploi page 19

■ Activity Reset
While Activity Detection is active, press this key to reset
the Activity Detection countdown timer. This will allow you
to remain in a tilted or stationary position, etc., without the
Emergency mode activating unnecessarily.
■ Autodial
Press this key to call the DTMF number that has been
programmed onto your selected channel. Your dealer may
program different DTMF numbers on different channels.
■ Battery Indicator
Press this key to announce the current battery energy level.
Battery level 4 (green LED) means the battery is full, level
3 (orange LED) is sufficient, level 2 (red LED) is low, and
level 1 (flashing red LED) is very low.
■ Call 1/ Call 2
Press these keys to send the 5-tone codes assigned to
them.
■ Emergency
Press and hold this key to enter Emergency mode. When
the transceiver enters Emergency mode, it will change to
the Emergency channel and begin transmitting based on
your dealer settings.
Note: This function can be programmed only on the Auxiliary
key.
9